Up for sale is this 1995 Okamoto Linear 618 manual surface grinder. This is a 6″ X 18″ model that has a maximum capacity of 7.5″ X 18.0″. The maximum table travel is 8″ X 21″. This machine is equipped with a Walker electromagnetic LBP fine pole chuck as well as a Walker variable strength chuck control. This also has a factory installed Sony dual axis DRO model LH31A. The glass scales are high precision Sony Magnescale SR-180’s. This machine has a one shot lubrication pump for easy lubrication all around. This machine has a 2HP motor that is dual voltage and can be run on 230V or 460V. This machine has the additional coolant guard and nozzle. Included with this machine is a coolant pump/sump (Graymills brand) as well as all the cast iron machine feet.
The backlash in the cross feed dial is 0.003″-0.004″ throughout the entire length of travel. Much of the original hand flaking is still visible on both V ways as well which indicates low wear.
This is a very heavy duty and rigid roller ball way surface grinder (2020 lbs) and is one of the best made. This machine is made in Japan. To purchase a machine like this new would cost over $25,000. There is a good reason many of the best tool rooms choose Okamoto machines.
This machine is powered up and available for inspection.
All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is under power and available for inspection.
I will help in any way I can to assist in transportation of this machine. Shipping weight is approx. 2200 pounds and shipping dimensions are roughly 70″ X 70″ X 70″. Forklift is on-site and can load this onto a truck or trailer.
Up for sale is this Hardinge HLV-H tool room lathe. This is 230V 3 phase and is 1.5 HP. The spindle is infinitely variable from 125-3000 RPM and it has the tapered Hardinge 4 degree spindle. I bought this machine some time back from a closed factory in Dayton, Ohio and I have never plugged it in or tested it. My intention was to fix and resell but I have not been able to find the time to do so. This is being listed as a “mechanics special” & sold as-is so please purchase knowing it will take some time and work to get up and running. This has an Anilam Wizard 111 DRO on both axis but again, condition is unknown. I do see that the power feed motor was removed at some time but this looks complete otherwise. All the dials and levers move as they should and the spindle rotates freely. This machine is certainly worth the time to fix as the normal price for an HLV-H of this age is $13,000 and up!I have a forklift and will load a trailer or semi at no cost. Palletizing fee is $250. The machine is available for inspection at my shop just outside of Milwaukee, WI.
This lathe also has the large metric threading gear box cover. With a metric banjo and the appropriate change gears this lathe will thread metric thread pitches.
SPECIFICATIONS:
Spindle Capacity 5C Collets – Round……………………………..1-1/16″ Spindle Capacity 5C Collets – Hex……………………………………..7/8″ Spindle Capacity 5C Collets – Square…………………………………3/4″ Step Chucks…………………………………………………………1-1/16″ – 6″ Spindle Nose………………………………………………Hardinge Tapered Variable Spindle Speeds…………………………………125 – 3000 RPM Swing Over Bed……………………………………………………………….11″ Swing Over Cross Slide………………………………………………………6″ Swing Over Carriage…………………………………………………………..9″ Distance Between Centers…………………………………………………18″ Hole thru Spindle………………………………………………………….1-1/4″ Compound Slide Travel………………………………………………………3″ Carriage Power Feed Range……………………………….5/16″ – 7 IPM Cross Slide Power Feed Range……………………………3/16″ – 4 IPM Tailstock Spindle Travel…………………………………………………3-3/4″ Tailstock Spindle Taper…………………………………………….No. 2 MT Lead Screw Diameter…………………………………………1″ – 8 Thread Range of Threads in Gear Box……………………………………11 – 108 Inch Threading……………………………………………..(36) 11 – 108 TPI Electrics………………………………………………………..230V/3Ph/60Hz
*Preliminary Specifications Subject to Verification
All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is available for inspection. Machine can be crated and shipped internationally. Payment to be made by cash, check or wire transferI will help in any way I can to assist in transportation of this machine. Shipping weight is approx. 2300 pounds and shipping dimensions are roughly 78″ X 40″ X 70″
Up for sale is this Hardinge HLV-H Super Precision Tool Room Lathe. This is a good, tight, & original machine and has never been repainted or abused. This machine was purchased new by a large tech company out in CA and was operated by one man its entire life. I purchased this from that man.
This is an early 1980’s machine that has many late model features such as a tapered Hardinge spindle, wide bed plate with teflon lined carriage, ball bearing carriage rack gear and more. This machine is 230V 3 Phase power. This machine is in good mechanical condition and is ready to be used right away. All the power feeds function as they should and the gearbox works as it should. The oiling lubrication system functions as it should as well. This lathe comes with the pictured tooling, including 2 trays of 5C collets. These are all different sizes and styles but the large majority are Hardinge brand. Other accessories are available such as taper attachment, steady rest, chucks, tool post, etc.
This machine is powered up and available for inspection.
SPECIFICATIONS: Spindle Capacity 5C Collets – Round……………………………..1-1/16″ Spindle Capacity 5C Collets – Hex……………………………………..7/8″ Spindle Capacity 5C Collets – Square…………………………………3/4″ Step Chucks…………………………………………………………1-1/16″ – 6″ Spindle Nose………………………………………………Hardinge Tapered Variable Spindle Speeds…………………………………125 – 3000 RPM Swing Over Bed……………………………………………………………….11″ Swing Over Cross Slide………………………………………………………6″ Swing Over Carriage…………………………………………………………..9″ Distance Between Centers…………………………………………………18″ Hole thru Spindle………………………………………………………….1-1/4″ Compound Slide Travel………………………………………………………3″ Carriage Power Feed Range……………………………….5/16″ – 7 IPM Cross Slide Power Feed Range……………………………3/16″ – 4 IPM Tailstock Spindle Travel…………………………………………………3-3/4″ Tailstock Spindle Taper…………………………………………….No. 2 MT Lead Screw Diameter…………………………………………1″ – 8 Thread Range of Threads in Gear Box……………………………………11 – 108 Number of Thread Changes in Gear Box……………………………..27 Inch Threading……………………………………………..(36) 11 – 108 TPI Electrics………………………………………………………..230V/3Ph/60Hz
*Preliminary Specifications Subject to Verification.
All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is under power and available for inspection. Machine can be crated and shipped internationally. Payment to be made by cash, check or wire transferI will help in any way I can to assist in transportation of this machine. Shipping weight is approx. 2000 pounds and shipping dimensions are roughly 78″ X 40″ X 70″
Up for sale is this Hardinge HLV-H EM (English/Metric) Super Precision Tool Room Lathe. This is in good condition and has never been repainted. This machine was originally purchased by the Polaroid Corp. and I purchased it from a technology company in the Boston area.To the best of my knowledge this is a 1980 machine that has many late model features such as a tapered Hardinge spindle, wide bed plate with teflon lined carriage, ball bearing carriage rack gear and more. This machine is 230V 3 Phase power. This lathe has the expanded english/metric gearbox that allows metric threading with the turn of a knob. This also has the dual dial readouts that have english and metric readings.This machine is in good mechanical condition and is ready to be used right away. All the power feeds function as they should and the gearbox works as it should. The oiling lubrication system functions as it should as well. This is equipped with an SWI Trak 102 two axis DRO that reads in 0.0005″ increments. The DRO manual is included too. This lathe comes with the pictured tooling, including 2 trays of 5C collets. These are all different sizes and styles but the large majority are Hardinge brand. Other accessories are available such as taper attachment, steady rest, chucks, tool post, etc.
This machine is powered up and available for inspection.
SPECIFICATIONS: Spindle Capacity 5C Collets – Round……………………………..1-1/16″ Spindle Capacity 5C Collets – Hex……………………………………..7/8″ Spindle Capacity 5C Collets – Square…………………………………3/4″ Step Chucks…………………………………………………………1-1/16″ – 6″ Spindle Nose………………………………………………Hardinge Tapered Variable Spindle Speeds…………………………………125 – 3000 RPM Swing Over Bed……………………………………………………………….11″ Swing Over Cross Slide………………………………………………………6″ Swing Over Carriage…………………………………………………………..9″ Distance Between Centers…………………………………………………18″ Hole thru Spindle………………………………………………………….1-1/4″ Compound Slide Travel………………………………………………………3″ Carriage Power Feed Range……………………………….5/16″ – 7 IPM Cross Slide Power Feed Range……………………………3/16″ – 4 IPM Tailstock Spindle Travel…………………………………………………3-3/4″ Tailstock Spindle Taper…………………………………………….No. 2 MT Lead Screw Diameter…………………………………………1″ – 8 Thread Range of Threads in Gear Box……………………………………11 – 108 Number of Thread Changes in Gear Box……………………………..72 Inch Threading……………………………………………..(36) 11 – 108 TPI Metric Threading………………………………………(36) 0.275 – 2.7 mm Electrics………………………………………………………..230V/3Ph/60Hz
*Preliminary Specifications Subject to Verification.
All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is under power and available for inspection. Machine can be crated and shipped internationally. Payment to be made by cash, check or wire transfer. I will help in any way I can to assist in transportation of this machine. Shipping weight is approx. 2300 pounds and shipping dimensions are roughly 78″ X 40″ X 70″
Up for sale is this Michael Deckel S-11 Universal High Precision Tool & Cutter Grinder. This is a 1985 model and is in very nice condition. Everything is functioning as it should. This is made in Germany and is the finest manual cutter grinder that money can buy. These do not come up for sale often and to purchase a unit new would be over $75,000 from Deckel (now called ISOG). This grinder is equipped with the motorized universal indexing head that is a 40 taper bore. This unit has an adapter to go from 40 taper to a Deckel style collet which is currently in the head. You could mount a chuck or any other tool that has a standard 40 taper profile. Almost everything pivots and moves so the grinding possibilities are endless. I have had much of this machine apart in order to fully service and clean it and it’s in great condition. The grinder has a new drive belt and a full oil flush. All of the slides and movements are extremely smooth and many ride on precision ball bearings. The spindle speed is variable up to 7000 RPM and the rapid spindle elevation feed works great both up and down. At some point this did have the optical measuring unit but it was gone before I had a chance to buy the machine. What’s left is the DRO and mount which do power up and seem to function. I believe this unit was purchased new by General Electric and came from a shuttered plant.
This machine is FOB New Berlin, Wisconsin. The buyer is responsible for all freight and I will assist in any way that I can. I will palletize and ship this machine freight, please ask for a quote. Local pick up is available as well. The grinder is powered up and available to test in my shop at any time. In person Inspections are welcome.
Up for sale is this Hardinge HLV-H EM (English/Metric) Super Precision Tool Room Lathe. This is in very good condition and has never been repainted. This was ordered from the factory in Hardinge white and grey colors. I purchased this machine at auction from a closed machine shop and have done a considerable amount of work to get the machine to where it is today.
This is a late 1988 machine and it has many late model features such as hardened and ground cross slide ways, tapered Hardinge spindle, wide bed plate with teflon lined carriage, pre-drilled DRO mounting points, ball bearing carriage rack gear and more. This machine is 230V 3 Phase but it is dual voltage so it can be changed to 460V if desired.
When received, the left cross slide wear strip was delaminating from the cast iron lathe carriage (common problem) and causing unacceptable binding in the cross slide. The carriage was removed and disassembled and both wear strips were peeled off. The surfaces were prepared using factory procedures and the strips were epoxied back into place. Both the hardened wear strips and dovetail surfaces were then ground in situ. The cross slide & gib were then hand scraped and fitted to the machine. As I was doing this work I elected to have many of the carriage surfaces reground for aesthetic purposes in addition to fully cleaning the machine. The Teflon sheet on the bottom of the carriage was in good condition and so it was left untouched. The Bijur oil pump has been completely rebuilt with new o-rings, filters, and gaskets and all oil metering units, o-rings, and copper tubes have been replaced with new. New neoprene way wipers have been installed and the apron hand wheel bushings have been replaced. Both variable speed drive belts have been replaced and the V.S. countershaft bearings have been replaced as well. Lastly, the dual dial compound has been disassembled, cleaned, & lubricated. I’m sure there are other things I’m missing but that is the general overview of what I have done to this machine.
After all this work the machine is now in excellent mechanical condition and is ready to be used right away. The spindle is whisper quiet and runs great at all speeds and the power feeds work great in all speeds and directions. The machine is very clean and tight and it now looks great too. Lathe comes with pictured tooling. This has a factory installed Acu-Rite DRO as well as a factory work light. Other accessories are available such as taper attachment, follow rest, steady rest, chucks, tool post, etc.
SPECIFICATIONS:
Spindle Capacity 5C Collets – Round……………………………..1-1/16″
Spindle Capacity 5C Collets – Hex……………………………………..7/8″
Spindle Capacity 5C Collets – Square…………………………………3/4″
Step Chucks…………………………………………………………1-1/16″ – 6″
Spindle Nose………………………………………………Hardinge Tapered
Variable Spindle Speeds…………………………………125 – 3000 RPM
Swing Over Bed……………………………………………………………….11″
Swing Over Cross Slide………………………………………………………6″
Swing Over Carriage…………………………………………………………..9″
Distance Between Centers…………………………………………………18″
Hole thru Spindle………………………………………………………….1-1/4″
Compound Slide Travel………………………………………………………3″
Carriage Power Feed Range……………………………….5/16″ – 7 IPM
Cross Slide Power Feed Range……………………………3/16″ – 4 IPM
Tailstock Spindle Travel…………………………………………………3-3/4″
Tailstock Spindle Taper…………………………………………….No. 2 MT
Lead Screw Diameter…………………………………………1″ – 8 Thread
Range of Threads in Gear Box……………………………………11 – 108
Number of Thread Changes in Gear Box……………………………..72
Inch Threading……………………………………………..(36) 11 – 108 TPI
Metric Threading…………………………………….(35) 0.4375 – 2.7 mm
Electrics………………………………………………………..230V/3Ph/60Hz
*Preliminary Specifications Subject to Verification.
Up for sale is this very nice Okamoto Linear L-612B 6″ X 12″ hand feed surface grinder. This is equipped with a Sony DRO, automatic lubrication system, & magnetic chuck. This is in very nice condition and has a whisper quiet spindle. The table rides on linear ball bearings and is belt driven for ultra smooth action. All the handles and movements are very smooth on this grinder. This is a year 2000 machine. This has all original paint as well and has not been repainted in any way. Unit comes with all 4 leveling pads.
These machines are over $18,000 new from Okamoto are are some of the best surface grinders in the world.
The spindle motor can be wired for 230V or 460V 3 phase power.
Bought new in 1995 this one owner machine is in excellent condition. It has spent its whole life in a 2 person home shop and has been very well cared for. Okamoto is the industry standard as far as automatic surface grinders go and this one is ready to use!
