Posted on

Okamoto 8-20 ST Automatic Surface Grinder

Up for sale is this Okamoto 8-20 ST hydraulic automatic surface grinder. This grinder is very configurable & adjustable and has a large assortment of automatic cycles that it is capable of performing. This machine is wired for 230V 3 phase power but can be wired the accept 460V 3 phase. This has an 8″ X 20″ electromagnetic chuck on it. The machine comes with one wheel hub and the maximum wheel size is 8″ diameter by 1″ width and 1.25″ hole. This machine has the original paint with the exception of the sheet metal guarding which was repainted by the previous owner. This includes a coolant pump and sump but the condition of the pump is unknown as it was not being used prior. I have powered this machine up and have cycled it for several hours without issue. This was removed from a facility that was using it every day for tool and die type work. This has a 2HP main spindle motor, a 1HP hydraulic pump motor, and a 0.5HP vertical rapid feed motor. Weight is approx. 3300 lbs. and floor space requirement is roughly 93.1″ X 65.4″ X 68″


This machine is under power and available to test prior to purchase.

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is available for inspection. Machine can be crated and shipped internationally. Payment to be made by cash, check or wire transfer

I will help in any way I can to assist in transportation of this machine. Shipping weight is approx. 3300 pounds and shipping dimensions are roughly 96″ X 68″ X 70″

SOLD

Posted on

2005 Mitsui MSG-205MH Surface Grinder

Up for sale is this Mitsui 6″ X 18″ surface grinder. The model is an MSG-205MH and the date of manufacture is 07/2005. This is in like new condition and is very highly optioned. This came out of the tool room of a high end mold shop and it was rarely used. Everything on this machine functions as it should. To purchase this grinder new would cost over $30,000 from Mitsui. This is absolutely the highest quality manual surface grinder that is available. Below is a list of the options this machine is equipped with…

-2HP (1.5KW) spindle motor (standard motor is 1-1/3HP (1.0KW))
-Variable frequency drive for adjustable wheel speed
-Fine down feed (0.00001″)
-Fine cross feed (0.00005″)
-Walker LBP fine pole electromagnetic chuck
-Walker variable strength chuck control
-Coolant guarding package with Graymills coolant sump & pump

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is available for inspection. Machine can be crated and shipped internationally. Payment to be made by cash, check or wire transfer

I will help in any way I can to assist in transportation of this machine. Shipping weight is approx. 1900 pounds and shipping dimensions are roughly 70″ X 70″ X 60″

SOLD

Posted on

2003 Okamoto Linear 6-18 Surface Grinder

Up for sale is this 2003 Okamoto Linear 6-18B 6″ X 18″ surface grinder. This is in nearly unused condition and has to be seen to be believed. This came from a technical college that closed its shop program. The spindle is whisper quiet on this machine and the paint is in amazing condition. This still retains all the original hand scraping on the dual V ways of the saddle. This is a dual voltage machine and can be set up on 230V or 460V 3 phase (wired for 230V currently). This is equipped with a Kanetsu 6″ X 18″ magnetic chuck. In addition, this has the coolant package with additional guarding and coolant tank. Also included are the 4 cast iron leveling pads with threaded adjusters. To purchase new this machine would cost over $18,000!

L6-18B Base Grinder                                       $15,800
Coolant package with splash guard             $1,950
Kanetsu KMT-A chuck                                    $1,170


This machine is equipped with an automatic lubrication system so there is no need to pump a lube pump. This features a hand scraped dual V way saddle, double walled column construction and heavily ribbed Meehanite castings for added rigidity. This is a roller way table that is belt driven for extra smooth operation.

I will palletize and ship this machine freight, please ask for a quote. Local pick-up is available as well. The grinder is powered up and available to test in my shop at any time. In person Inspections are welcome. This is available for immediate sale.

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Payment to be made by cash, check or wire transfer.

I will help in any way I can to assist in transportation of this machine. Shipping weight is approx. 2200 pounds and shipping dimensions are roughly 70″ X 70″ X 70″. Forklift is on-site and can load this onto a truck or trailer.

Machine Features

• Construction Design— heavily ribbed Meehanite cast construction provides superior rigidity for vivration damping and optimum grinding accuracy. Designed for long-term, trouble-free performance.

• Extra-large Handwheels— conveniently located to optimize operator control, convenience and comfort. Zero-setting slip rings for vertical and cross feed hand wheels.

• Smooth Table Movement— moves easily through reliable belt drive table and linear ball bearing system. Cushioned table stops absorb impact when work piece limits are established.

• Centralized Controls – — for ease of operation, convenience and safety.

• Double-Walled Column Construction… Precision guideways provide the strength

• Precision Grinding Spindle—no-maintenance “ lubed for life” cartridge type grinding wheel spindle standard. Directly coupled to dynamically balanced, fan cooled motor. Universal taper on spindle nose allows for interchange of wheel adapters with other tool room grinders.

• Automatic Lubrication — All Linear B Models utilize a proven Automatic Lubrication System. Lubrication oil is pumped to an oil reservoir located in the column and all guideway surfaces and positioning screws.

Machine Specifications :

Capacity:

Maximum Longitudinal Travel 20.87 inch

Maximum Cross Travel 8.27 inch

Maximum Distance under Wheel (8.0” to Table Surface) 14.27 inch

Magnetic Chuck Size (WxL) 6 x 18 inch

Table:

Surface (Width x Length) 6.2 x 18.9 inch.

Hand Feed per Revolution 5.12inch

Crossfeed:

Crossfeed Per Revolution 0.100 inch

Handfeed Dial Graduation 0.001 inch

Wheelhead:

Downfeed Per Revolution 0.050 inch

Handfeed Dial Graduation 0.0001 inch

Grinding Wheel Size (DxWxB) 8.0 x 1.0 x 1.25 inch

Motors:

Grinding Wheel Spindle 2 hp

Power Supply: 230/460V, 3PH. 60HZ. 1.8 KVA

Desired Power Supply including

(Electro-Magnetic Chuck & Coolant System)

Floor Space ( L x W x H ) : 77 x 56 x 68 inch

Net Weight: 2,070 lbs.

SOLD

Posted on

1988 Mitsui MSG-250MH 8″ X 18″ Surface Grinder

Up for sale is this Mitsui 8″ X 18″ surface grinder. This is in nice condition and everything functions as it should. This still retains the original hand scraping on the dual V ways of the saddle. This surface grinder runs on either 208 or 230V 3 phase power. I have replaced all of the lubrication metering valves as well as cleaned and serviced the grinder. The table and saddle were removed and cleaned. The ball bearings in the table were removed, cleaned, and greased. The revolving handles, saddle rubber mats, and rubber coolant guard are new as well. This is equipped with a Walker 8″ X 18″ Ceramax fine pole magnetic chuck. This machine also has the optional 12″ grinding wheel package which includes a balancing wheel hub. This grinder is set up for coolant use and includes a coolant tank with pump. In addition, included are the 4 cast iron leveling pads with threaded adjusters. Mutsui is the best of the best and to purchase new this machine would cost over $30,000!

This machine is equipped with an automatic lubrication system so there is no need to pump a lube pump. This features a hand scraped dual V way saddle, double walled column construction and heavily ribbed Meehanite castings for added rigidity. This is a roller way table for extra smooth operation.

The grinder is powered up and available to test in my shop at any time. In person Inspections are welcome. This is available for immediate sale.
 
All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Payment to be made by cash, check or wire transfer.

Shipping weight is approx. 2500 pounds and shipping dimensions are roughly 60″ X 60″ X 80″. Forklift is on-site and can load this onto a truck or trailer.

SOLD
Posted on

2012 Haas ST-20 Turning Center

Up for sale is this late 2012 Haas ST-20 CNC turning center. This is a nice unit with only 4600 spindle hours. The options on the machine are spindle orientation, belt-type chip conveyor, and programable hydraulic tailstock. The standard features and specifications are listed below.

This lathe comes out of a state of the art, beautifully clean, brass foundry machine shop. Brass is what this lathe has machined its whole life. All machines in this shop are bank leased and every 7 years are traded in for new units without exception. This came off the shop floor in fully functional condition running parts until the minute it was disconnected. To purchase a new machine with these options from Haas is nearly $70,000!

This lathe has just received a full turret and wedge alignment service and is within all Haas factory specifications. The local Haas Factory Outlet has been out to inspect this machine and has noted zero issues.

This machine is powered up and available for inspection. 

Standard Features: 

• 8.3″ Hydraulic Chucking System 

• A2-6 Spindle Nose 

• 2.0″ Bar Capacity 

• 15″ Color LCD Monitor 

• Built-In USB Port 

• 1 MB Program Memory 

• Rigid Tapping 

• User-Friendly Haas Control 

• ISO Standard G-Code Programming 

Options 

• Programmable Hydraulic Tailstock 

• Belt-Type Chip Conveyor 

• Spindle Orientation

Specifications:

DATE OF MANUFACTURE                                             2012

SWING OVER FRONT APRON                                       31.8″

SWING OVER CROSS SLIDE                                          20.8″

MAX. CUTTING DIAMETER                                          15″

MAX CUTTING LENGTH                                                21″

BAR CAPACITY                                                                 2″

X AXIS TRAVEL                                                                9.3″

Z AXIS TRAVEL                                                                 21″

RAPID TRAVERSE ALL AXES                                       945 IPM

SPINDLE SPEEDS                                                              4000 RPM

SPINDLE NOSE                                                                   A2-6

SPINDLE BORE                                                                  3.5″

SPINDLE MOTOR                                                              20 HP

TURRET CAPACITY                                                         12 STATIONS

TAILSTOCK STROKE                                                       21″

TAILSTOCK TAPER                                                          MT #4

APPROX. DIMENSION                                                     165″ x 77″ x 81″

MACHINE WEIGHT                                                          9000 lbs (approx)

*SPECIFICATIONS SUBJECT TO VERIFICATION

SOLD

Posted on

2000 Bridgeport 2HP Milling Machine

Up for sale is this model year 2000 Bridgeport knee mill. This is a 2HP Series 1 that has the 2J variable speed head with an RPM range of 60-4200. This has the large 9″ X 48″ table as well as chrome ways on the Y axis. It is equipped with a 2 axis Acurite DRO with SENC 150 glass scales and a Bridgeport 8F power feed for the X axis. This has a Bijur manual lubrication pump for way lubrication and an adjustable work lamp.

This machine appears to be in good condition and seems to have been taken care of. I have powered it up and everything seems to function as it should. There are no marks or mishaps on the table and the original flaking is still visible. The power feed on the table works as well as the power feed in the head. There were no abnormal noises in the spindle or drivetrain as I ran it through the spindle speeds. The back gear works great as well. I do notice the table movements get tight at the extremes of travel which is common for these machines when the work is always in the center of travel. 

This machine is powered up and local inspection is encouraged. 

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is under power and available for inspection. Machine can be crated and shipped internationally. Payment to be made by cash, check or wire transfer

I will help in any way I can to assist in transportation of this machine. Custom palletizing, stretch wrapping and preparation is $150.

SOLD

Posted on

2001 Mitsui MSG-200 MH Surface Grinder

Up for sale is this Mitsui 6″ X 12″ surface grinder (MSG-200MH). This is in nice condition and everything functions as it should. This still retains the original hand scraping on the dual V ways of the saddle. This is a 2001 machine that was installed new in early 2004. This came from a single shift injection mold shop. This surface grinder runs on either 208V or 230V 3 phase power. The grinder has a factory installed Sony LH51 single axis DRO with the high precision SR-128 glass scale on the Y axis. This is equipped with a Walker 6″ X 12″ LBP fine pole electromagnetic chuck with variable strength controller. In addition, included are the cast iron leveling pads with threaded adjusters. Mitsui is the best of the best and to purchase new this machine would cost over $25,000!

This machine is equipped with an automatic lubrication system so there is no need to pump a lube pump. This features a hand scraped dual V way saddle, double walled column construction and heavily ribbed Meehanite castings for added rigidity. This is a roller way table for extra smooth operation.

I will palletize and ship this machine freight, please ask for a quote. Local pick-up is available as well. The grinder is powered up and available to test in my shop at any time. In person Inspections are welcome. This is available for immediate sale.

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Payment to be made by cash, check or wire transfer. I will help in any way I can to assist in transportation of this machine. Shipping weight is approx. 2000 pounds and shipping dimensions are roughly 70″ X 70″ X 70″. Forklift is on-site and can load this onto a truck or trailer.

SOLD
Posted on

2006 Hermle C600V CNC Milling Machine

2006 Hermle C600V milling machine which was installed new in 2008. Low spindle hours (~5500), came out of a single shift tool & die shop. 16,000 RPM HSK-63A spindle with Renishaw probe and Blum laser tool setter. 240V to 400V transformer and spindle chiller included.

X axiz 600MM

Y axis 450MM

Z axis 450MM

Heidenhain iTNC 530 control

16,000 RPM Spindle

HSK-A 63

30 Pocket tool changer

Renishaw high precision probing system

Blum laser tool length & diameter setter + breakage detection

Air protected Heidenhain linear scales

Posted on

Bridgeport 2J Replacement Head

Up for sale is this genuine 2HP Bridgeport variable speed 2J milling machine head. This came off a low hour 1986 Bridgeport knee mill in which the customer replaced this with a 3HP aftermarket unit. This is in great condition and has the original paint. I have rebuilt the upper head with new belts and bearings and the lower end is all original. This is an R8 spindle and the quill is in great shape. All the power feed functions work as they should. The variable speed works just like it should as does the back gear. The head runs through all the speeds easily and I do not hear any abnormal noises at all. This is ready to bolt on and use.

This machine is powered up and available for inspection. 

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is under power and available for inspection. Machine can be crated and shipped internationally. Payment to be made by cash, check or wire transfer.

I will help in any way I can to assist in transportation of this machine.
Posted on

2004 Okamoto Linear 618B Surface Grinder

Up for sale is this 2004 Okamoto Linear 6-18B 6″ X 18″ surface grinder. This is in very nice condition and everything functions as it should. The spindle is whisper quiet on this machine and the paint is in great condition. This still retains all the original hand scraping on the dual V ways of the saddle. This is a dual voltage machine and can be set up on 230V or 460V 3 phase (wired for 230V currently). This is equipped with a Walker 6″ X 18″ LBP fine pole electromagnetic chuck and Walker variable strength chuck controller. In addition, this has the Micro Vertical Feed option for down feed increments of 0.00005″. Also included are the 4 cast iron leveling pads with threaded adjusters. To purchase new this machine would cost over $20,500!

L6-18B Base Grinder             $15,800
Micro Vertical Feed                $1,950
Walker LBP Chuck                 $2,000
Walker Chuck Controller     $1,113

This machine is equipped with an automatic lubrication system so no need to pump a lube pump. This features a hand scraped dual V way saddle, double walled column construction and heavily ribbed Meehanite castings for added rigidity. This is a roller way table that is belt driven for extra smooth operation.

Machine Features

• Construction Design— heavily ribbed Meehanite cast construction provides superior rigidity for vivration damping and optimum grinding accuracy. Designed for long-term, trouble-free performance.

• Extra-large Handwheels— conveniently located to optimize operator control, convenience and comfort. Zero-setting slip rings for vertical and cross feed hand wheels.

• Smooth Table Movement— moves easily through reliable belt drive table and linear ball bearing system. Cushioned table stops absorb impact when work piece limits are established.

• Centralized Controls – — for ease of operation, convenience and safety.

• Double-Walled Column Construction… Precision guideways provide the strength

• Precision Grinding Spindle—no-maintenance “ lubed for life” cartridge type grinding wheel spindle standard. Directly coupled to dynamically balanced, fan cooled motor. Universal taper on spindle nose allows for interchange of wheel adapters with other tool room grinders.

• Automatic Lubrication — All Linear B Models utilize a proven Automatic Lubrication System. Lubrication oil is pumped to an oil reservoir located in the column and all guideway surfaces and positioning screws.

Machine Specifications :

Capacity:

Maximum Longitudinal Travel 20.87 inch

Maximum Cross Travel 8.27 inch

Maximum Distance under Wheel (8.0” to Table Surface) 14.27 inch

Magnetic Chuck Size (WxL) 6 x 18 inch

Table:

Surface (Width x Length) 6.2 x 18.9 inch.

Hand Feed per Revolution 5.12inch

Crossfeed:

Crossfeed Per Revolution 0.100 inch

Handfeed Dial Graduation 0.001 inch

Wheelhead:

Downfeed Per Revolution 0.050 inch

Handfeed Dial Graduation 0.0001 inch

Grinding Wheel Size (DxWxB) 8.0 x 1.0 x 1.25 inch

Motor:

Grinding Wheel Spindle 2 hp

Power Supply: 230/460V, 3PH. 60HZ. 1.8 KVA

Desired Power Supply including

(Electro-Magnetic Chuck & Coolant System)

Floor Space ( L x W x H ) : 77 x 56 x 68 inch

Net Weight: 2,070 lbs.

This machine is FOB New Berlin, Wisconsin. The buyer is responsible for all freight and I will assist in any way that I can. I will palletize and ship this machine freight, please ask for a quote. Local pick-up is available as well. The grinder is powered up and available to test in my shop at any time. In person Inspections are welcome. This is available for immediate sale.

SOLD