Specializing in custom manufacturing of machined components
Up for sale is this Deckel SOE precision tool cutter grinder. This is a 1986 unit and runs on 208V 3 Phase. This piece is highly optioned and comes with the cast iron base, optical comparator, collets, tooling & more.
Up for sale is this very nice K&T Model K 10″ universal spiral dividing head. Everything on this unit works great and is in really excellent condition. Very smooth. The head rotates and pivots smoothly and the fine feed dial works great. This has a 7″ Buck 4761 6 jaw chuck mounted to it which is also in excellent condition. Both the tail stock and dividing head have matching serial numbers of 21/4936. Also included is the chuck key, reverse jaws, and an additional pair of dividing plates. I have not seen another nicer one of these dividing heads and the company who owned it took great care of all their machines and accessories. Once the chuck is removed there should be a CAT50 taper but I have not taken the chuck off to confirm. This unit has a 5:1 drive ratio.
This will be palletized and shipped LTL via common carrier freight. You can have this delivered to a business address at no extra cost or you can pick up from the freight terminal. Local pick up is also welcomed.
SOLD
Up for sale is this Hardinge HLV-H Super Precision Tool Room Lathe. This was just taken out of service from a machine shop liquidation. This appears to be in nice condition and has the original paint. The compound is nice and smooth and the longitudinal travel of the carriage feels nice. The bed plate also looks very nice under the headstock. The cross slide gets tight at the end of travel and will need work but the machine is priced accordingly for this. The hardened wear strips can come un-glued from coolant intrusion and I suspect they need to be glued back down. It could use a good cleaning of course. This machine is equipped with a Southwestern Industries Trak 102 (proto-trak) DRO on both axis. Machine also includes the factory original work light. There is no tooling included with this machine but the lathe cabinet does have both collet carousels.
This machine has many late model features such as hardened and ground cross slide ways, tapered Hardinge spindle, wide bed plate with teflon lined carriage, pre-drilled DRO mounting points, ball bearing carriage rack gear and more.
This machine is wired for 208V 3 phase power.
SPECIFICATIONS:
Spindle Capacity 5C Collets – Round……………………………..1-1/16″
Spindle Capacity 5C Collets – Hex……………………………………..7/8″
Step Chucks…………………………………………………………1-1/16″ – 6″
Variable Spindle Speeds…………………………………125 – 3000 RPM
Swing Over Bed……………………………………………………………….11″
Swing Over Cross Slide………………………………………………………6″
Swing Over Carriage…………………………………………………………..9″
Distance Between Centers…………………………………………………18″
Hole thru Spindle………………………………………………………….1-1/4″
Compound Slide Travel………………………………………………………3″
Carriage Power Feed Range……………………………….5/16″ – 7 IPM
Cross Slide Power Feed Range……………………………3/16″ – 4 IPM
Tailstock Spindle Travel…………………………………………………3-3/4″
Tailstock Spindle Taper…………………………………………….No. 2 MT
Lead Screw Diameter…………………………………………1″ – 8 Thread
Range of Threads in Gear Box……………………………………11 – 108
Number of Thread Changes in Gear Box……………………………..27
Electrics………………………………………………………..208V/3Ph/60Hz
*Preliminary Specifications Subject to Verification.
All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is available for inspection. Machine can be crated and shipped internationally. Payment to be made by cash, check or wire transfer
I will help in any way I can to assist in transportation of this machine. Shipping weight is approx. 2100 pounds and shipping dimensions are roughly 78″ X 40″ X 70″
1967 Monarch 10EE Module Drive
Up for sale is this very nice and highly optioned 2013 Okamoto Linear L818B 8″ X 18″ hand feed surface grinder. This size machine is no longer available from Okamoto and from what Okamoto says they did not sell many of them due to their high cost. Okamoto currently only sells a 6″ X 18″ version. This was purchased new by a biomedical company in California (Theranos) and has seen very little use over the course of its life. The paint is all original and in great shape. This really is a like new machine. These machines feature smooth table movement through a reliable belt drive, have a recirculating automatic lubrication system, heavy duty ribbed meehanite castings, no maintenance, lubed for life, cartridge type spindle, and are designed for long term trouble free performance.
This grinder is equipped with…
-Sony Magnescale DRO on both axis
-Okamoto coolant & dust suction unit
-Coolant system with splash guard
-Micro-feeder for cross movement
-Micro-feeder for vertical movement
-Work Light
-O.S. Walker LBP 8″X18″ electro magnetic chuck
-O.S. Walker variable chuck controller
A 6″X18″ machine equipped with these options is over $30,000 new from Okamoto and is one of the best surface grinders in the world. This one is in excellent condition and is at a fraction of the new price!
The machine can be wired for 230V or 460V 3 phase power.
All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is available for inspection. Machine can be crated and shipped internationally. Payment to be made by cash, check or wire transfer
SOLD
Up for sale is this 1986 Bridgeport Series 1 vertical milling machine. This is all original and not rebuilt, repainted, or refurbished. This is highly optioned and in good condition. This was purchased from an Abbott laboratory and was only ever used lightly. Table is 42″ long and has 12″ of travel in the Y direction.
Everything functions as it should and is as smooth as can be.
This is equipped with an Acu-rite 200S 2 axis DRO as well as a Bridgeport X axis power feed and a Servo Z axis power feed. This machine has a Bijur one shot lube pump, chrome hardened ways, and a Kurt power drawbar. Mounted to the machine is a machine light and a lighted magnifying lens. This mill accepts R8 collets and has a variable speed head.
Machine is FOB New Berlin, WI. I can palletize and ship this machine LTL freight. I will help in any way I can to arrange transport of this machine. I have a forklift and can load it onto a truck or trailer as well.
SOLD
Up for sale is this very nice Okamoto Linear PFG-612 6″ X 12″ hand feed surface grinder. This is equipped with a factory installed Sony DRO, one shot lube pump, Walker fine pole electromagnetic chuck, and coolant ready guarding. This is in very nice condition and has a whisper quiet spindle. All the handles and movements are very smooth on this grinder. The saddle has been removed for cleaning and the original scraping is still visible on the Turcite as well as the cast iron double V section. This has all original paint as well and has not been repainted. All the oil metering units have been cleaned and are fully functioning. The Walker chuck controller has variable, full, and release holding modes. Unit also comes with a factory manual and the 3 factory leveling pads.
These machines are over $20,000 new from Okamoto are are some of the best surface grinders in the world.
The spindle motor can be wired for 230V or 460V 3 phase power.
All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is available for inspection. Machine can be crated and shipped internationally. Payment to be made by cash, check or wire transfer
Up for sale is this Hardinge HLV-H Super Precision Tool Room Lathe. This is in exceptionally nice condition and has had very low use. This is all original and has never been repainted. This came out of a laboratory setting and was used in making prototype parts. This machine was in excellent condition when I received it so the only work that has been done is a full clean and replacement of the neoprene way wipers. The oiling system has been cleaned and flushed as well as the carriage fluid flushed and replaced with new. Everything functions as it should and is just smooth smooth smooth. This is a very nice machine; one of the nicest I have come across.
This is a 1986 machine and it has many late model features such as hardened and ground cross slide ways, tapered Hardinge spindle, wide bed plate with teflon lined carriage, pre-drilled DRO mounting points, ball bearing apron rack gear and more.
Machine comes with pictured tooling (misc. 5C collets, live center, Buck 3 jaw adjust-tru chuck, drill chuck, factory change gear, & drive plate). In addition I have the coolant nozzle as well as the lexan chip shield. Other accessories are available such as taper attachment, follow rest, steady rest, chucks etc.
SPECIFICATIONS:
Spindle Capacity 5C Collets – Round……………………………..1-1/16″
Spindle Capacity 5C Collets – Hex……………………………………..7/8″
Step Chucks…………………………………………………………1-1/16″ – 6″
Variable Spindle Speeds…………………………………125 – 3000 RPM
Swing Over Bed……………………………………………………………….11″
Swing Over Cross Slide………………………………………………………6″
Swing Over Carriage…………………………………………………………..9″
Distance Between Centers…………………………………………………18″
Hole thru Spindle………………………………………………………….1-1/4″
Compound Slide Travel………………………………………………………3″
Carriage Power Feed Range……………………………….5/16″ – 7 IPM
Cross Slide Power Feed Range……………………………3/16″ – 4 IPM
Tailstock Spindle Travel…………………………………………………3-3/4″
Tailstock Spindle Taper…………………………………………….No. 2 MT
Lead Screw Diameter…………………………………………1″ – 8 Thread
Range of Threads in Gear Box……………………………………11 – 108
Number of Thread Changes in Gear Box……………………………..27
Electrics………………………………………………………..230V/3Ph/60Hz
*Preliminary Specifications Subject to Verification.
All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is available for inspection. Machine can be crated and shipped internationally. Payment to be made by cash, check or wire transfer
SOLD
This unit was purchased used in 1995. It has spent its life since then in a 2 person garage machine shop and has been used sparingly since. Has the cam lock style spindle and includes 7500 RPM and 38,000 RPM grinding heads.
This machine is ready to use!
