Posted on

2004 Okamoto Linear 618B Surface Grinder

Up for sale is this 2004 Okamoto Linear 6-18B 6″ X 18″ surface grinder. This is in very nice condition and everything functions as it should. The spindle is whisper quiet on this machine and the paint is in great condition. This still retains all the original hand scraping on the dual V ways of the saddle. This is a dual voltage machine and can be set up on 230V or 460V 3 phase (wired for 230V currently). This is equipped with a Walker 6″ X 18″ LBP fine pole electromagnetic chuck and Walker variable strength chuck controller. In addition, this has the Micro Vertical Feed option for down feed increments of 0.00005″. Also included are the 4 cast iron leveling pads with threaded adjusters. To purchase new this machine would cost over $20,500!

L6-18B Base Grinder             $15,800
Micro Vertical Feed                $1,950
Walker LBP Chuck                 $2,000
Walker Chuck Controller     $1,113

This machine is equipped with an automatic lubrication system so no need to pump a lube pump. This features a hand scraped dual V way saddle, double walled column construction and heavily ribbed Meehanite castings for added rigidity. This is a roller way table that is belt driven for extra smooth operation.

Machine Features

• Construction Design— heavily ribbed Meehanite cast construction provides superior rigidity for vivration damping and optimum grinding accuracy. Designed for long-term, trouble-free performance.

• Extra-large Handwheels— conveniently located to optimize operator control, convenience and comfort. Zero-setting slip rings for vertical and cross feed hand wheels.

• Smooth Table Movement— moves easily through reliable belt drive table and linear ball bearing system. Cushioned table stops absorb impact when work piece limits are established.

• Centralized Controls – — for ease of operation, convenience and safety.

• Double-Walled Column Construction… Precision guideways provide the strength

• Precision Grinding Spindle—no-maintenance “ lubed for life” cartridge type grinding wheel spindle standard. Directly coupled to dynamically balanced, fan cooled motor. Universal taper on spindle nose allows for interchange of wheel adapters with other tool room grinders.

• Automatic Lubrication — All Linear B Models utilize a proven Automatic Lubrication System. Lubrication oil is pumped to an oil reservoir located in the column and all guideway surfaces and positioning screws.

Machine Specifications :

Capacity:

Maximum Longitudinal Travel 20.87 inch

Maximum Cross Travel 8.27 inch

Maximum Distance under Wheel (8.0” to Table Surface) 14.27 inch

Magnetic Chuck Size (WxL) 6 x 18 inch

Table:

Surface (Width x Length) 6.2 x 18.9 inch.

Hand Feed per Revolution 5.12inch

Crossfeed:

Crossfeed Per Revolution 0.100 inch

Handfeed Dial Graduation 0.001 inch

Wheelhead:

Downfeed Per Revolution 0.050 inch

Handfeed Dial Graduation 0.0001 inch

Grinding Wheel Size (DxWxB) 8.0 x 1.0 x 1.25 inch

Motor:

Grinding Wheel Spindle 2 hp

Power Supply: 230/460V, 3PH. 60HZ. 1.8 KVA

Desired Power Supply including

(Electro-Magnetic Chuck & Coolant System)

Floor Space ( L x W x H ) : 77 x 56 x 68 inch

Net Weight: 2,070 lbs.

This machine is FOB New Berlin, Wisconsin. The buyer is responsible for all freight and I will assist in any way that I can. I will palletize and ship this machine freight, please ask for a quote. Local pick-up is available as well. The grinder is powered up and available to test in my shop at any time. In person Inspections are welcome. This is available for immediate sale.

SOLD

Posted on

2013 Okuma Genos L250E CNC Lathe

2013 Okuma Genos L250E CNC Lathe in excellent condition. Less than 40 spindle hours! Includes all original tooling, manuals, tool holders etc.. Includes optional chip conveyor. Has Royal 5C collet chuck in addition to the Kitagawa pictured. The was bought new by a small job shop in 2013. Due to the owners failing health this sat mostly unused.

Specifications:

SWING OVER BED ………………………… 17.72″

SWING OVER CARRIAGE…………………13.78″

SWING OVER CROSS SLIDE …………………. 11.81″

MAX. TURNING DIAMETER X LENGTH……….. 8.66″ X 19.6″

X-AXIS TRAVEL …………………………. 6.299″

Z-AXIS TRAVEL …………………………. 18.504″

RAPID TRAVERSE X/Z …………………….. 787/984 IPM

SPINDLE NOSE ………………………….. JIS A2-6

SPINDLE BORE ………………………….. 2.59″

SPINDLE SPEEDS ………………………… 4500 RPM

SPINDLE MOTOR …………………… 14.75 HP / 30 MINUTE

TURRET CONFIGURATION …………………… 12 STATION

TURRET INDEXING TIME …………………… .3 SECONDS

OD TOOL SHANK …………………………. 1″

TAILSTOCK QUILL DIAMETER ……………….. 3.54″

TAILSTOCK TAPERED BORE …………………. MT#5

QUILL TRAVEL ………………………….. 3.94″

MACHINE DIMENSIONS …………… 109″ X 61″ X 62″ TALL

MACHINE WEIGHT ……………….8,377 LBS

SOLD

Posted on

1995 Okamoto Linear 618 Surface Grinder

Up for sale is this 1995 Okamoto Linear 618 manual surface grinder. This is a 6″ X 18″ model that has a maximum capacity of 7.5″ X 18.0″. The maximum table travel is 8″ X 21″. This machine is equipped with a Walker electromagnetic LBP fine pole chuck as well as a Walker variable strength chuck control. This also has a factory installed Sony dual axis DRO model LH31A. The glass scales are high precision Sony Magnescale SR-180’s. This machine has a one shot lubrication pump for easy lubrication all around. This machine has a 2HP motor that is dual voltage and can be run on 230V or 460V. This machine has the additional coolant guard and nozzle. Included with this machine is a coolant pump/sump (Graymills brand) as well as all the cast iron machine feet.

The backlash in the cross feed dial is 0.003″-0.004″ throughout the entire length of travel. Much of the original hand flaking is still visible on both V ways as well which indicates low wear.

This is a very heavy duty and rigid roller ball way surface grinder (2020 lbs) and is one of the best made. This machine is made in Japan. To purchase a machine like this new would cost over $25,000. There is a good reason many of the best tool rooms choose Okamoto machines.

This machine is powered up and available for inspection. 

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is under power and available for inspection.

I will help in any way I can to assist in transportation of this machine. Shipping weight is approx. 2200 pounds and shipping dimensions are roughly 70″ X 70″ X 70″. Forklift is on-site and can load this onto a truck or trailer.
Posted on

1983 Series I 2 HP Bridgeport Milling Machine

Up for sale is this 1983 Bridgeport Series I milling machine. This is 2HP and runs on 230V 3 phase power. This is the desirable variable speed J head model. This is in great condition and is coming out of an R&D lab environment with little use. The paint is all original and has never been repainted. This has a 9″ X 42″ table as well as hard chrome Y axis ways. This has an Acu-rite dual axis DRO with SENC 150 glass scales as well as a Servo brand X axis power feed. Also Included is a 6″ Kurt D60 made in USA milling vise with speed handle (rotary table is NOT included). The table is in great condition with only one end mill mark present but flaking is visible throughout. Everything is smooth on this machine and it really is in nice condition.

This machine is powered up and available for inspection. All the feeds work as they should and the spindle speeds are adjustable and quiet in all ranges.

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is under power and available for inspection. Payment to be made by cash, check or wire transfer.

I will help in any way I can to assist in transportation of this machine. Shipping weight is approx. 2200 pounds and shipping dimensions are roughly 70″ X 70″ X 70″. Forklift is on-site and can load this onto a truck or trailer.
Posted on

Okamoto PFG-612 Linear Surface Grinder

Up for sale is this Okamoto Linear PFG-612 manual surface grinder. This is a 6″ X 12″ model that has a maximum capacity of 7.5″ X 14.0″. The maximum table travel is 8″ X 15″. The machine is equipped with a Walker electromagnetic LBP fine pole chuck as well as a Walker variable strength chuck control. Grinder also has a Sokki (made in Japan) single axis glass scale DRO. This machine has a one shot lubrication pump for easy lubrication all around. This machine has a 2HP motor that is dual voltage and can be run on 230V or 460V.This is a very heavy duty and rigid roller ball way surface grinder (1700 lbs) and is one of the best made. This machine is made in Japan. To purchase a machine like this new would cost over $20,000.

There is a good reason many of the best tool rooms choose Okamoto machines.

This machine is powered up and available for inspection. 

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is under power and available for inspection. Payment to be made by cash, check or wire transfer.
I will help in any way I can to assist in transportation of this machine. Shipping weight is approx. 2000 pounds and shipping dimensions are roughly 70″ X 70″ X 70″. Forklift is on-site and can load this onto a truck or trailer.
Posted on

Scotchman CPO 350 Variable Speed Cold Saw

Up for sale today is this Scotchman CPO350VS cold saw. This is a very heavy duty saw that is made in the USA. This is in excellent condition and came out of a research company’s R&D lab. This was bought new and was not used much. This is a variable speed saw (11-177 RPM) which is a $2000 option on its own. This takes a 14″ saw blade and is equipped with a 5 HP motor. This is wired for 208V 3 phase power and has a coolant pump and chip tray. Everything works as it should, this saw is ready to use. The new price on this saw is over $8000 plus tax & freight so save money by purchasing it here. This saw includes a 110T Scotchman brand blade which is installed.

I can palletize and ship if needed, please ask for a quote. Machine is powered and available for inspection. FOB New Berlin, WI


Posted on

1977 Hardinge HLV-H Lathe

Up for sale is this Hardinge HLV-H tool room lathe. This is 230V 3 phase and is 1.5 HP. The spindle is infinitely variable from 125-3000 RPM and it has the tapered Hardinge 4 degree spindle. I bought this machine some time back from a closed factory in Dayton, Ohio and I have never plugged it in or tested it. My intention was to fix and resell but I have not been able to find the time to do so. This is being listed as a “mechanics special” & sold as-is so please purchase knowing it will take some time and work to get up and running. This has an Anilam Wizard 111 DRO on both axis but again, condition is unknown. I do see that the power feed motor was removed at some time but this looks complete otherwise. All the dials and levers move as they should and the spindle rotates freely. This machine is certainly worth the time to fix as the normal price for an HLV-H of this age is $13,000 and up!I have a forklift and will load a trailer or semi at no cost. Palletizing fee is $250. The machine is available for inspection at my shop just outside of Milwaukee, WI.

This lathe also has the large metric threading gear box cover. With a metric banjo and the appropriate change gears this lathe will thread metric thread pitches.

SPECIFICATIONS:

Spindle Capacity 5C Collets – Round……………………………..1-1/16″
Spindle Capacity 5C Collets – Hex……………………………………..7/8″
Spindle Capacity 5C Collets – Square…………………………………3/4″
Step Chucks…………………………………………………………1-1/16″ – 6″
Spindle Nose………………………………………………Hardinge Tapered
Variable Spindle Speeds…………………………………125 – 3000 RPM
Swing Over Bed……………………………………………………………….11″
Swing Over Cross Slide………………………………………………………6″
Swing Over Carriage…………………………………………………………..9″
Distance Between Centers…………………………………………………18″
Hole thru Spindle………………………………………………………….1-1/4″
Compound Slide Travel………………………………………………………3″
Carriage Power Feed Range……………………………….5/16″ – 7 IPM
Cross Slide Power Feed Range……………………………3/16″ – 4 IPM
Tailstock Spindle Travel…………………………………………………3-3/4″
Tailstock Spindle Taper…………………………………………….No. 2 MT
Lead Screw Diameter…………………………………………1″ – 8 Thread
Range of Threads in Gear Box……………………………………11 – 108
Inch Threading……………………………………………..(36) 11 – 108 TPI
Electrics………………………………………………………..230V/3Ph/60Hz

*Preliminary Specifications Subject to Verification

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is available for inspection. Machine can be crated and shipped internationally. Payment to be made by cash, check or wire transferI will help in any way I can to assist in transportation of this machine. Shipping weight is approx. 2300 pounds and shipping dimensions are roughly 78″ X 40″ X 70″

SOLD
Posted on

Hardinge HLV-H Lathe

Up for sale is this Hardinge HLV-H Super Precision Tool Room Lathe. This is a good, tight, & original machine and has never been repainted or abused. This machine was purchased new by a large tech company out in CA and was operated by one man its entire life. I purchased this from that man.

This is an early 1980’s machine that has many late model features such as a tapered Hardinge spindle, wide bed plate with teflon lined carriage, ball bearing carriage rack gear and more. This machine is 230V 3 Phase power. This machine is in good mechanical condition and is ready to be used right away. All the power feeds function as they should and the gearbox works as it should. The oiling lubrication system functions as it should as well. This lathe comes with the pictured tooling, including 2 trays of 5C collets. These are all different sizes and styles but the large majority are Hardinge brand. Other accessories are available such as taper attachment, steady rest, chucks, tool post, etc.

This machine is powered up and available for inspection. 

SPECIFICATIONS:
Spindle Capacity 5C Collets – Round……………………………..1-1/16″
Spindle Capacity 5C Collets – Hex……………………………………..7/8″
Spindle Capacity 5C Collets – Square…………………………………3/4″
Step Chucks…………………………………………………………1-1/16″ – 6″
Spindle Nose………………………………………………Hardinge Tapered
Variable Spindle Speeds…………………………………125 – 3000 RPM
Swing Over Bed……………………………………………………………….11″
Swing Over Cross Slide………………………………………………………6″
Swing Over Carriage…………………………………………………………..9″
Distance Between Centers…………………………………………………18″
Hole thru Spindle………………………………………………………….1-1/4″
Compound Slide Travel………………………………………………………3″
Carriage Power Feed Range……………………………….5/16″ – 7 IPM
Cross Slide Power Feed Range……………………………3/16″ – 4 IPM
Tailstock Spindle Travel…………………………………………………3-3/4″
Tailstock Spindle Taper…………………………………………….No. 2 MT
Lead Screw Diameter…………………………………………1″ – 8 Thread
Range of Threads in Gear Box……………………………………11 – 108
Number of Thread Changes in Gear Box……………………………..27
Inch Threading……………………………………………..(36) 11 – 108 TPI
Electrics………………………………………………………..230V/3Ph/60Hz

*Preliminary Specifications Subject to Verification.

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is under power and available for inspection. Machine can be crated and shipped internationally. Payment to be made by cash, check or wire transferI will help in any way I can to assist in transportation of this machine. Shipping weight is approx. 2000 pounds and shipping dimensions are roughly 78″ X 40″ X 70″

Price: SOLD
Posted on

Hardinge HLV-H-EM Tool Room Lathe

Up for sale is this Hardinge HLV-H EM (English/Metric) Super Precision Tool Room Lathe. This is in good condition and has never been repainted. This machine was originally purchased by the Polaroid Corp. and I purchased it from a technology company in the Boston area.To the best of my knowledge this is a 1980 machine that has many late model features such as a tapered Hardinge spindle, wide bed plate with teflon lined carriage, ball bearing carriage rack gear and more. This machine is 230V 3 Phase power. This lathe has the expanded english/metric gearbox that allows metric threading with the turn of a knob. This also has the dual dial readouts that have english and metric readings.This machine is in good mechanical condition and is ready to be used right away. All the power feeds function as they should and the gearbox works as it should. The oiling lubrication system functions as it should as well. This is equipped with an SWI Trak 102 two axis DRO that reads in 0.0005″ increments. The DRO manual is included too. This lathe comes with the pictured tooling, including 2 trays of 5C collets. These are all different sizes and styles but the large majority are Hardinge brand. Other accessories are available such as taper attachment, steady rest, chucks, tool post, etc.

This machine is powered up and available for inspection. 

SPECIFICATIONS:
Spindle Capacity 5C Collets – Round……………………………..1-1/16″
Spindle Capacity 5C Collets – Hex……………………………………..7/8″
Spindle Capacity 5C Collets – Square…………………………………3/4″
Step Chucks…………………………………………………………1-1/16″ – 6″
Spindle Nose………………………………………………Hardinge Tapered
Variable Spindle Speeds…………………………………125 – 3000 RPM
Swing Over Bed……………………………………………………………….11″
Swing Over Cross Slide………………………………………………………6″
Swing Over Carriage…………………………………………………………..9″
Distance Between Centers…………………………………………………18″
Hole thru Spindle………………………………………………………….1-1/4″
Compound Slide Travel………………………………………………………3″
Carriage Power Feed Range……………………………….5/16″ – 7 IPM
Cross Slide Power Feed Range……………………………3/16″ – 4 IPM
Tailstock Spindle Travel…………………………………………………3-3/4″
Tailstock Spindle Taper…………………………………………….No. 2 MT
Lead Screw Diameter…………………………………………1″ – 8 Thread
Range of Threads in Gear Box……………………………………11 – 108
Number of Thread Changes in Gear Box……………………………..72
Inch Threading……………………………………………..(36) 11 – 108 TPI
Metric Threading………………………………………(36) 0.275 – 2.7 mm
Electrics………………………………………………………..230V/3Ph/60Hz

*Preliminary Specifications Subject to Verification.

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is under power and available for inspection. Machine can be crated and shipped internationally. Payment to be made by cash, check or wire transfer. I will help in any way I can to assist in transportation of this machine. Shipping weight is approx. 2300 pounds and shipping dimensions are roughly 78″ X 40″ X 70″

SOLD!
Posted on

2012 Okamoto Linear 6-18B Hand Feed Surface Grinder

Up for sale is this 2012 Okamoto Linear 6-18B 6″ X 18″ surface grinder. This is in very nice condition and everything functions as it should. The spindle is whisper quiet on this machine and the paint is in great condition. This has not been used much over its life and still retains all the original hand scraping on the dual V ways of the saddle. This is a dual voltage machine and can be set up on 230V or 460V 3 phase (wired for 230V currently). This is equipped with a Walker 6″ X 18″ LBP fine pole electromagnetic chuck and Walker variable chuck controller. This has a Sony Magnescale LH70-2 digital readout with 2 Sony GB-ER (SR138R) 0.5 micron resolution glass scales. In addition this has the Micro Vertical Feed option for down feed increments of 0.00005″. Also included is a magnetic work light and the 4 leveling pads with threaded adjusters. To purchase new this machine would cost over $24,000.

L6-18B Base Grinder             $15,800
Micro Vertical Feed                $1,950
Walker LBP Chuck                 $2,000
Walker Chuck Controller     $510
Sony 2 Axis DRO                     $4,080

This machine is equipped with an automatic lubrication system so no need to pump a lube pump. This features a hand scraped dual V way saddle, double walled column construction and heavily ribbed Meehanite castings for added rigidity. This is a roller way table that is belt driven for extra smooth operation.

Machine Features

• Construction Design— heavily ribbed Meehanite cast construction provides superior rigidity for vivration damping and optimum grinding accuracy. Designed for long-term, trouble-free performance.

• Extra-large Handwheels— conveniently located to optimize operator control, convenience and comfort. Zero-setting slip rings for vertical and cross feed hand wheels.

• Smooth Table Movement— moves easily through reliable belt drive table and linear ball bearing system. Cushioned table stops absorb impact when work piece limits are established.

• Centralized Controls – — for ease of operation, convenience and safety.

• Double-Walled Column Construction… Precision guideways provide the strength

• Precision Grinding Spindle—no-maintenance “ lubed for life” cartridge type grinding wheel spindle standard. Directly coupled to dynamically balanced, fan cooled motor. Universal taper on spindle nose allows for interchange of wheel adapters with other tool room grinders.

• Automatic Lubrication — All Linear B Models utilize a proven Automatic Lubrication System. Lubrication oil is pumped to an oil reservoir located in the column and all guideway surfaces and positioning screws.

Machine Specifications :

Capacity:

Maximum Longitudinal Travel 20.87 inch

Maximum Cross Travel 8.27 inch

Maximum Distance under Wheel (8.0” to Table Surface) 14.27 inch

Magnetic Chuck Size (WxL) 6 x 18 inch

Table:

Surface (Width x Length) 6.2 x 18.9 inch.

Hand Feed per Revolution 5.12inch

Crossfeed:

Crossfeed Per Revolution 0.100 inch

Handfeed Dial Graduation 0.001 inch

Wheelhead:

Downfeed Per Revolution 0.050 inch

Handfeed Dial Graduation 0.0001 inch

Grinding Wheel Size (DxWxB) 8.0 x 1.0 x 1.25 inch

Motors:

Grinding Wheel Spindle 2 hp

Power Supply: 230/460V, 3PH. 60HZ. 1.8 KVA

Desired Power Supply including

(Electro-Magnetic Chuck & Coolant System)

Floor Space ( L x W x H ) : 77 x 56 x 68 inch

Net Weight: 2,070 lbs.

This machine is FOB New Berlin, Wisconsin. The buyer is responsible for all freight and I will assist in any way that I can. I will palletize and ship this machine freight, please ask for a quote. Local pick-up is available as well. The grinder is powered up and available to test in my shop at any time. In person Inspections are welcome. This is available for immediate sale.