Posted on

REGO-FIX PGU-9000A Automatic clamping press for powRgrip tool holders

SOLD! Up for sale is this REGO-FIX clamping press for their powRgrip tool holder system. This is in excellent condition and came out of a fortune 100 company’s prototype lab. This functions perfectly in every way and is ready to use immediately. The pressing die that is included is for the PG25 size holders. I have a PG 32 die that is also available for purchase if desired ($500). If you would like the PG32 rather than the PG25 I can do that as well. This is an excellent high performance tool holder system and these presses are very expensive to purchase new. Save some money by purchasing this here.

Currently a new press with one die is $8900 plus freight from REGO-FIX.

This item is F.O.B. New Berlin, WI. I will prepare this item to ship freight but it is the buyer’s responsibility to finalize that set up. Please ask for a freight quote if you are interested, I will help in any way I can to help arrange freight. Local pick up and test is available as well. 
Posted on

1995 Okamoto 12-24 DX Surface Grinder

Up for sale is this Okamoto 12-24 DX hydraulic automatic surface grinder. This machine was purchased by me from the original owners (father & son) who operated a two man tool & die shop in their backyard. This machine is in original, low hour, condition and has been cared for its entire life. It is extremely clean which is uncommon for grinders in general. This machine is wired for 208/230V 3 phase power but can be re-wired for 460V 3 phase. This is equipped with a 12″ X 24″ Walker LBP fine pole electromagnetic chuck as well as a coolant tank. This comes with all the original paperwork, manuals, and tooling as well as a few spare grinding wheels.

This machine is under power and available to test prior to purchase.

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is available for inspection. Payment to be made by cash, check or wire transfer

I will help in any way I can to assist in transportation of this machine. Shipping weight is approx. 6000 pounds and shipping dimensions are roughly 96″ X 80″ X 70″

SOLD

Posted on

Okamoto 8-20 ST Automatic Surface Grinder

Up for sale is this Okamoto 8-20 ST hydraulic automatic surface grinder. This grinder is very configurable & adjustable and has a large assortment of automatic cycles that it is capable of performing. This machine is wired for 230V 3 phase power but can be wired the accept 460V 3 phase. This has an 8″ X 20″ electromagnetic chuck on it. The machine comes with one wheel hub and the maximum wheel size is 8″ diameter by 1″ width and 1.25″ hole. This machine has the original paint with the exception of the sheet metal guarding which was repainted by the previous owner. This includes a coolant pump and sump but the condition of the pump is unknown as it was not being used prior. I have powered this machine up and have cycled it for several hours without issue. This was removed from a facility that was using it every day for tool and die type work. This has a 2HP main spindle motor, a 1HP hydraulic pump motor, and a 0.5HP vertical rapid feed motor. Weight is approx. 3300 lbs. and floor space requirement is roughly 93.1″ X 65.4″ X 68″


This machine is under power and available to test prior to purchase.

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is available for inspection. Machine can be crated and shipped internationally. Payment to be made by cash, check or wire transfer

I will help in any way I can to assist in transportation of this machine. Shipping weight is approx. 3300 pounds and shipping dimensions are roughly 96″ X 68″ X 70″

SOLD

Posted on

REGO-FIX PGU-9006A Automatic clamping press for powRgrip tool holders

Up for sale is the REGO-FIX PGU-9006A powRgrip automatic clamping unit. This is in great condition and includes a PG-15 die. This runs on regular 115V power from a normal wall outlet. This came from a General Electric prototype lab and was not used much at all. This has been powered up and tested and is in fully functioning condition. These are extremely difficult to find used and they are extremely expensive to buy new so save some $$ here.


This item is F.O.B. New Berlin, WI and I can palletize and ship this freight.

SOLD

Posted on

2005 Mitsui MSG-205MH Surface Grinder

Up for sale is this Mitsui 6″ X 18″ surface grinder. The model is an MSG-205MH and the date of manufacture is 07/2005. This is in like new condition and is very highly optioned. This came out of the tool room of a high end mold shop and it was rarely used. Everything on this machine functions as it should. To purchase this grinder new would cost over $30,000 from Mitsui. This is absolutely the highest quality manual surface grinder that is available. Below is a list of the options this machine is equipped with…

-2HP (1.5KW) spindle motor (standard motor is 1-1/3HP (1.0KW))
-Variable frequency drive for adjustable wheel speed
-Fine down feed (0.00001″)
-Fine cross feed (0.00005″)
-Walker LBP fine pole electromagnetic chuck
-Walker variable strength chuck control
-Coolant guarding package with Graymills coolant sump & pump

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is available for inspection. Machine can be crated and shipped internationally. Payment to be made by cash, check or wire transfer

I will help in any way I can to assist in transportation of this machine. Shipping weight is approx. 1900 pounds and shipping dimensions are roughly 70″ X 70″ X 60″

SOLD

Posted on

1965 Monarch 10EE long bed lathe

Pictures of the progress on the Monarch 10EE lathe. All photos after the serial number tag are of the lathe in its current condition. Work done listed below…

-General cleaning and scrubbing of the entire lathe, full fluid change

-Re-wired broken speed potentiometer, replaced bulged capacitor

-Replace all oil metering units with new and rebuild oil pump. Flushed apron and all oil lines

-Replaced all drive belts, replaced bearings in idler pulleys, flushed back gear gearbox

-Replaced old module drive unit with new modern solid state module

-Replaced worn out ELSR components such as felt seals, worn key, steel wipers, etc.

Posted on

1995 Okamoto 12-24 DX Surface Grinder

Up for sale is this 1995 Okamoto ACC-1224 DX automatic surface grinder. This machine has a capacity of 12″ X 24″ and uses a 12″ diameter grinding wheel. This machine can be wired for either 208V, 230V or 460V three phase power (currently wired for 208V). This has an optional Heidenhain dual axis DRO as well as a hydraulic overhead wheel dresser. This is equipped with a filter paper type coolant tank and includes an additional grinding wheel and hub. The electromagnetic chuck is a Walker 12″ X 24″ LBP fine pole unit. This grinder is in good functioning condition and is ready to use. The spindle is whisper quiet. This came out of a shop which closed its doors but was being used regularly up until that point. This machine has had its 30 gallons of hydraulic oil/way lube drained so that will need to be replaced before use.

Also included are the cast iron machine feet/pads, operation manual with original inspection report, and the original tool box with wheel wrenches and other misc. pieces.

SOLD
Posted on

1976 English/Metric Hardinge HLV-H

Up for sale is this Hardinge HLV-H Super Precision Tool Room Lathe. This is a good, tight, & original machine and has never been repainted or abused. This machine was purchased new by IBM in Austin, TX and was then sold to a company in Florida in 1991. It sat unused from 1991 up until I purchased it. This is a 1976 machine that has many late model features such as a tapered Hardinge spindle, wide bed plate with teflon lined carriage, ball bearing carriage rack gear and more. This machine is 208V 3 Phase power. At some point this machine had an Anilam DRO on it and all that is left now is the scales. I do not have a way to test if these scales are still working. The graduated dials on this machine are in metric units. I have done an initial cleaning and some general maintenance to the lathe which includes…

-Replaced both motor and spindle drive belts with new
-Flushed fluid in apron-Replaced both bearings in AC electric motor
-Replaced both bearings in drive unit counter-shaft
-Replaced O-rings in oiling system
-Removed, cleaned, & adjusted cross slide
-Greased gear box

This machine is in good mechanical condition and is ready to be used right away. The bed plate on this lathe is in excellent condition. I have ran and tested the lathe for several hours without issue. All the power feeds function as they should and the gearbox works as it should. The oiling lubrication system functions as it should as well. The drive unit is now very smooth in all RPM ranges. This lathe comes with the pictured tooling, including 2 trays of 5C collets. There is a complete set of metric change gears for all metric threading pitches. Nearly every collet is Hardinge brand and many of them have never been used. This machine is powered up and available for inspection. 

SOLD
Posted on

Engis 15LC Lapping Machine

Up for sale is this very nice Engis 15″ bench top lapping machine. This is a model 15LC that is powered by 115V single phase power. As you can see this unit has the optional variable speed motor drive as well as a digital timer and optional slurry pump. This has a cast iron lapping plate as well as 3 conditioning rings with hand weights. This unit is in good condition and operates as it should. This unit is clean and was not used hard throughout its life. Please see the last picture for a listing of the specifications from Engis.

To purchase this machine new from Engis would cost $8000+ not including the upgrade options that this machine has! According to Engis this very machine was the last 15LC to leave their factory before they released the FL-15 series.

I will palatalize and ship this machine freight, please ask for a quote. Local pick-up is available as well. The lapping machine is powered up and available to test in my shop at any time. In person Inspections are welcome. This is available for immediate sale.

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Payment to be made by cash, check or wire transfer.

I will help in any way I can to assist in transportation of this machine. Shipping weight is approx. 450 pounds and shipping dimensions are roughly 48″ X 40″ X 30″. Forklift is on-site and can load this onto a truck or trailer.

SOLD